NOT ALL RJ-45S ARE CREATED EQUAL
SENTINEL CONNECTOR SYSTEMS - WHEN SIGNAL INTEGRITY MATTERS
VETERAN OWNED BUSINESS ENTERPRISE - MADE IN USA
1,000,000 Plugs Built Every Day + 20,000 Cable Assemblies
Sentinel 111S08080056-34 - General Cable GenSPEED® 5000 Cat5e Screended Plenum Cables
VETERAN OWNED BUSINESS ENTERPRISE (VOBE)
VETERAN OWNED BUSINESS ENTERPRISE (VOBE)
Download Interactive General Cable-Sentinel RJ-45 Plug Cross Reference .XLS Spreadsheet
GenSPEED® 5000 Category 5e
Screened Plenum Cables
Includes part numbers 2131611E (Blue Spool), 2131778E (White Spool), 2131777E (Yellow Spool), 2131673E (Gray Spool), 2131774E (Red Spool), 2131776E (Orange Spool), 2131775E (Green Spool) and 2131779E (Black Spool).
* Utilizes a 4 over 4 contact design (4 LONG and 4 SHORT) that provides increased isolation and spatial dispersion within the plug to minimize crosstalk. Accepts .039" to .043" MAXIMUM CONDUCTOR OD.
* The conductors are isolated by the Conductor Load Bar and through Plastic Isolation/Insulation Barriers where contact termination is made, thereby improving electrical performance.
* Plug accepts both SOLID or STRANDED conductors
* Made in USA
111S08080056-34 Specifications
Performance: Meets or Exceeds ANSI/TIA/EIA 568 - ANSI/TIA 1096-A (Formerly FCC Part 68) - CENELEC EN 50173 -
IEC 60603 - ISO-8877 - ISO/IEC 11801
Contact Material: Phosphor Bronze - .012" thick
Contact Plating: Minimum 50 Micro-Inch Pure Gold - Selective 24 Carat Hard Gold Plate in contact area over 100 Micro-Inch minimum Nickel Plate. Exceeds TIA-1096 specifications (formerly FCC Part 68)
Plug Material: Polycarbonate
Plug Tolerances and Dimensions: Meets TIA-1096 specifications (formerly FCC Part 68)
UL Recognized: UL File #E188111
Flame Autoextinguish: 94-V0
Operating Temperature: -40º C to +85º C
Insertion/Extraction Life: 1000 Minimum Cycles
Contact Resistance: 10 Milli-Ohms maximum
Current/Voltage: 30 VAC/42 VDC at 1.5 Amps
Compliance: RoHS Compliant
111S08080056-34 Termination Instructions
PROPER CABLE PREPARATION INCLUDES COPPER SHIELDING TAPE TO MAINTAIN SHIELD INTEGRITY
Load Bar Shown in Example
Recommended Shielding Tape - 3M 1181 - 1/2" Copper Foil with Conductive Adhesive 
Recommended Hand Crimp Tool - 900005 (with factory installed die set 900216) 
DO NOT TAKE THIS STEP FOR GRANTED
Cable assemblies built using inadequate or poor quality tools and dies.....worn out tooling.....or mismatched tooling, WILL HAVE A MAJOR IMPACT ON THE PERFORMANCE OF THE CABLE ASSEMBLY.
Professional Grade - Controlled Ratchet Style Insures Proper Blade Setting Depth - 1,000,000 Cycles MinimumDO NOT TAKE THIS STEP FOR GRANTED
Cable assemblies built using inadequate or poor quality tools and dies.....worn out tooling.....or mismatched tooling, WILL HAVE A MAJOR IMPACT ON THE PERFORMANCE OF THE CABLE ASSEMBLY.
Recommended CLEAR Slimline Snagless Locking Boot B0046L
Boot "Locks" into Plug - 360º Honeycomb Design Provides Bend Radius Strain Relief
Clear Plastic eliminates color "mismatch" between cable and boot.
Accepts up to .265" Jacket OD (6.7mm)
Heat Shrink - 3M™ Heat Shrink Tubing EPS-300
1/2 Inch Diameter - Adhesive-Lined, 3:1, Flexible, Polyolefin
"Lock" Everything in Place
Sold in 3 Inch Lengths
The RJ-45 Is A Highly Engineered Interconnection System
CAVEAT EMPTOR.....Let The Buyer Beware
SUB-STANDARD, NON-COMPLIANT and COUNTERFEIT RJ45's coming in from the Far East
KNOW THE STANDARDS - KNOW THE SPECS - INSIST ON COMPLIANCE - KNOW YOUR SUPPLIERSFor more information, contact
dave@rj45s.com
RJ45s.com
2400 East Main Street
St Charles, IL 60174
phone: 630-659-6337
fax: 888-210-4593
