NOT ALL RJ-45S ARE CREATED EQUAL
FEATURING SENTINEL CONNECTOR SYSTEMS - WHEN SIGNAL INTEGRITY MATTERS
Shipping Over 100,000,000 RJ45 Plugs a Year - MADE in USA
Cage Code 71SB6 DUNS 191497254 P:630-659-6337 dave@rj45s.com
Shipping Over 100,000,000 RJ45 Plugs a Year - MADE in USA
Cage Code 71SB6 DUNS 191497254 P:630-659-6337 dave@rj45s.com
TSR2304SBL (Black)
TSR2304SBU (Blue)
TSR2304SGN (Green)
TSR2304SGY (Gray)
TSR2304SON (Orange)
TSR2304SVI (Violet)
TSR2304SRD (Red)
TSR2304SWH (White)
TSR2304SYE (Yellow)
TSR2304SBU (Blue)
TSR2304SGN (Green)
TSR2304SGY (Gray)
TSR2304SON (Orange)
TSR2304SVI (Violet)
TSR2304SRD (Red)
TSR2304SWH (White)
TSR2304SYE (Yellow)
Click in Box for PayPal Drop Down Menu
1-99 - $2.39
100-999 - $2.16
1000 - $1.64
Can't Use PayPal?....email order
* Shielded RJ45 plug with integral "C CRIMP" for increased shield effectiveness, added cable stress relief and additional strength. Accepts up to a .310" cable jacket OD
* Incorporates a PATENTED CONDUCTIVE NEXT Reduction System. In addition to providing PRECISE CONDUCTOR ALIGNMENT, the Composite Carbon/Graphite Fiber Conductor Load Bar GREATLY REDUCES NEXT and RETURN LOSS by ABSORBING REFLECTIONS and CHANNELING IT AWAY FROM THE CONDUCTORS. Using recommended termination procedures and equipment, ANSI/TIA-568.2-DCategory 6A performance levels are achievable with good workmanship and certified cables.
* Utilizes a 4 over 4 contact design (4 LONG and 4 SHORT) that provides increased isolation and spatial dispersion within the plug to minimize crosstalk and accepts .044" - 048" CONDUCTOR OD.
*
The conductors are isolated by the Conductor Load Bar and through Plastic Isolation/Insulation Barriers where contact termination is made, thereby improving electrical performance.
* Plug accepts both SOLID or STRANDED conductors
* Made in USA
111S08080090H34 Specifications
Performance: Meets or Exceeds ANSI/TIA 568-2.D - ANSI/TIA 1096 (Formerly FCC Part 68) - ANSI/TIA 968-A - CENELEC EN 50173 - IEC 60603 - ISO-8877 - ISO/IEC 11801
Contact Material: Phosphor Bronze - .012" thick
Contact Plating: Minimum 50 Micro-Inch Pure Gold - Selective 24 Carat Hard Gold Plate in contact area over 100 Micro-Inch minimum Nickel Plate. Exceeds TIA-1096 specifications (formerly FCC Part 68)
Plug Material: Polycarbonate
Plug Tolerances and Dimensions: Meets TIA-1096 specifications (formerly FCC Part 68)
UL Recognized: UL File #E188111 - UL 1863 (1000v)
Flame Autoextinguish: 94V-0
Operating Temperature: -40º C to +85º C
Insertion/Extraction Life: 1000 Minimum Cycles
Contact Resistance: 10 Milli-Ohms maximum
Current/Voltage: 30 VAC/57 VDC at 1.5 Amps
Compliance: RoHS Compliant
PoE: Meets requirements of 15W PoE (IEEE 802.3af), 30W PoE+ (IEEE 802.3at), 60W PoE++ (IEEE 802.3bt Type 3) and 100W PoE++ (IEEE 802.3bt Type 4)
COMPLEMENTARY PRODUCTS TO "DO THE JOB RIGHT" |
||
 900020 Terminates Both Contacts and "C" Crimp |
TERMINATION TOOL Professional Grad Controlled Ratchet Style Insures Proper Blade Setting Depth 1,000,000 Cycles Minimum DO NOT TAKE THIS STEP FOR GRANTED Cable assemblies built using inadequate or poor quality tools and dies.....worn out tooling.....or mismatched tooling, WILL HAVE A MAJOR IMPACT ON THE PERFORMANCE OF THE CABLE ASSEMBLY. 111S08080090H34 Termination Instructions  |
|
 |
SNAGLESS STRAIN RELIEF BOOT OPTIONS 8MM SNAGLESS BOOT Accepts up to 8MM Jacket OD (.314") Care must be taken to fully wrap the C CRIMP around the Cable (360º) to insure proper fit. Color Options: B0041 (Gray) - B0042 (Blue) - B0043 (White) B0044 (Yellow) - B0046 (Red) - B0047 (Orange) B0048 (Purple) - B0049 (Green) - B0051 (Black) - B0052 (Clear) |
8MM Boots |
 3M™ 1181  |
PROPER CABLE PREPARATION INCLUDES COPPER SHIELDING TAPE TO MAINTAIN SHIELD INTEGRITY & PROVIDING A PLACE FOR THE "C CRIMP" SHIELD ON THE CABLE 3M™ 1181 1/2" Copper Foil Shielding Tape with Conductive Adhesive  |
|
 3M™ EPS-300 |
3M™ HEAT SHRINK TUBING 1/2 Inch Diameter Adhesive-Lined, 3:1, Flexible, Polyolefin "Lock" Everything in Place Sold in 1 1/2 Inch Lengths  |
|
The RJ-45 Is A Highly Engineered Interconnection System
CAVEAT
EMPTOR.....Let The Buyer
Beware
SUB-STANDARD, NON-COMPLIANT and COUNTERFEIT RJ45's coming in from the Far East
KNOW THE STANDARDS - KNOW THE SPECS - INSIST ON COMPLIANCE - KNOW YOUR SUPPLIERS
For more information, contact
dave@rj45s.com
RJ45s.com
2400 East Main Street
St Charles, IL 60174
phone: 630-659-6337
dave@rj45s.com
RJ45s.com
2400 East Main Street
St Charles, IL 60174
phone: 630-659-6337
