NOT ALL RJ-45S ARE CREATED EQUAL
FEATURING SENTINEL CONNECTOR SYSTEMS - WHEN SIGNAL INTEGRITY MATTERS
Shipping Over 100,000,000 RJ45 Plugs a Year - MADE in USA
Cage Code 71SB6 DUNS 191497254 P:630-659-6337 dave@rj45s.com
Shipping Over 100,000,000 RJ45 Plugs a Year - MADE in USA
Cage Code 71SB6 DUNS 191497254 P:630-659-6337 dave@rj45s.com
111-08080054L34
RJ45 Plug for BELDEN® 3632 - CAT6++ Horizontal Bonded-Pair, 4pr, UTP, LS-PVC Jkt, CMP Cable - .234" OD
Mid-Level System Cable (3600)
BELDEN® 3632
CATEGORY 6++ 400 MHz Bonded Pair U/UTP 23 AWG Solid CMR Cable
With Spline - .234" OD
CAT6++ (400MHz), 4-Bonded-pairs, U/UTP-unshielded, Riser-CMR, Premise Horizontal cable, 23 AWG solid bare copper conductors, polyolefin insulation, X-spline, ripcord, PVC jacket.
Includes Part Numbers:
3632 0101000 BLACK 1K REEL
3632 010A1000 BLACK 1K RIB
3632 0061000 BLUE 1K REEL
3632 006A1000 BLUE 1K RIB
3632 006U1000 BLUE
3632 0081000 GRAY 1K REEL
3632 008A1000 GRAY 1K RIB
3632 008U1000 GRAY
3632 0051000 GREEN 1K REEL
3632 005A1000 GREEN 1K RIB
3632 003A1000 ORANGE 1K RIB
3632 0091000 WHITE 1K REEL
3632 009A1000 WHITE 1K RIB
3632 009U1000 WHITE
3632 0041000 YELLOW 1K REEL
3632 004A1000 YELLOW 1K RIB
Click in Box for PayPal Drop Down Menu
1-99 - $.89
100-999 - $.75
1000 - $.19
Can't Use PayPal?....email order
111-08080054L34 Product Features
* Incorporates a PATENTED CONDUCTIVE NEXT Reduction System. In addition to providing PRECISE CONDUCTOR ALIGNMENT, the Composite Carbon/Graphite Fiber Conductor Load Bar GREATLY REDUCES NEXT and RETURN LOSS by ABSORBING REFLECTIONS and CHANNELING IT AWAY FROM THE CONDUCTORS. Using recommended termination procedures and equipment, ANSI/TIA-568.2-D Category 6 performance levels are achievable with good workmanship and certified cables.
* Utilizes a 4 over 4 contact design (4 LONG and 4 SHORT) that provides increased isolation and spatial dispersion within the plug to minimize crosstalk and allow for up to a .042" MAXIMUM CONDUCTOR OD.
* The conductors are isolated by the Conductor Load Bar and through Plastic Isolation/Insulation Barriers where contact termination is made, thereby improving electrical performance.
* Plug accepts both SOLID or STRANDED conductors
* Made in USA
111-08080054L34 Specifications
Performance: Meets or Exceeds ANSI/TIA 568-2.D - ANSI/TIA 1096 (Formerly FCC Part 68) - ANSI/TIA 968-A - CENELEC EN 50173 - IEC 60603 - ISO-8877 - ISO/IEC 11801
Contact Material: Phosphor Bronze - .012" thick
Contact Plating: Minimum 50 Micro-Inch Pure Gold - Selective 24 Carat Hard Gold Plate in contact area over 100 Micro-Inch minimum Nickel Plate. Exceeds TIA-1096 specifications (formerly FCC Part 68)
Plug Material: Polycarbonate
Plug Tolerances and Dimensions: Meets TIA-1096 specifications (formerly FCC Part 68)
UL Recognized: UL File #E188111 - UL 1863 (1000v)
Flame Autoextinguish: 94V-0
Operating Temperature: -40º C to +85º C
Insertion/Extraction Life: 1000 Minimum Cycles
Contact Resistance: 10 Milli-Ohms maximum
Current/Voltage: 30 VAC/57 VDC at 1.5 Amps
Compliance: RoHS Compliant
PoE: Meets requirements of 15W PoE (IEEE 802.3af), 30W PoE+ (IEEE 802.3at), 60W PoE++ (IEEE 802.3bt Type 3) and 100W PoE++ (IEEE 802.3bt Type 4)
COMPLEMENTARY PRODUCTS TO "DO THE JOB RIGHT" |
||
 900005/900216  |
TERMINATION TOOL Professional Grade Controlled Ratchet Style Insures Proper Blade Setting Depth 1,000,000 Cycles Minimum DO NOT TAKE THIS STEP FOR GRANTED Cable assemblies built using inadequate or poor quality tools and dies.....worn out tooling.....or mismatched tooling, WILL HAVE A MAJOR IMPACT ON THE PERFORMANCE OF THE CABLE ASSEMBLY. 111-08080054L34 Termination Instructions  |
|
    |
SNAGLESS STRAIN RELIEF BOOT OPTIONS SLIM-LINE STRAIN RELIEF SNAGLESS BOOTS Color Options: B0013 (Blue) - B0028 (Light Gray) B0029 (Dark Gray) - B0030 (Yellow) B0031 (Green) - B0032 (Black) - B0033 (Purple) B0034 (White) - B0035 (Red) and B0040 (Orange) RUBBER PULL OVER STRAIN RELIEF SNAGLESS BOOTS Color Options: B001 (light Gray) - B002 (Dark Gray) B003 (Blue) - B004 (Yellow) - B005 (Green) B006 (Black) - B007 (Purple) -B008 (White) B009 (Red) - B0010 (Orange) and B0011 (Pink) |
6MM Boots |
 3M™ EPS-300 |
3M™ HEAT SHRINK TUBING 1/2 Inch Diameter Adhesive-Lined, 3:1, Flexible, Polyolefin "Lock" Everything in Place Sold in 1 1/2 Inch Lengths  |
|
The RJ-45 Is A Highly Engineered Interconnection System
CAVEAT EMPTOR.....Let The Buyer Beware
SUB-STANDARD, NON-COMPLIANT and COUNTERFEIT RJ45's coming in from the Far East
KNOW THE STANDARDS - KNOW THE SPECS - INSIST ON COMPLIANCE - KNOW YOUR SUPPLIERS
For more information, contact
dave@rj45s.com
RJ45s.com
2400 East Main Street
St Charles, IL 60174
phone: 630-659-6337
dave@rj45s.com
RJ45s.com
2400 East Main Street
St Charles, IL 60174
phone: 630-659-6337
