SENTINEL CONNECTOR SYSTEMS - WHEN SIGNAL INTEGRITY MATTERS
VETERAN OWNED BUSINESS ENTERPRISE - MADE IN USA
1,000,000 Plugs Built Every Day + 20,000 Cable Assemblies
VETERAN OWNED BUSINESS ENTERPRISE (VOBE)
Download Interactive Belden-Sentinel RJ-45 Plug Cross Reference .XLS Spreadsheet
BELDEN® Category 5e DataTuff® Twisted Pair Cable
Industrial Ethernet Cable, Harsh Environments, 350MHz Enhanced Category 5e, Gigabit Ethernet, 100BaseTX, 100BaseVG ANYLAN, 155ATM, 622ATM, NTSC/PAL Component or Composite Video, AES/EBU Digital Audio, AES51, RS-422, RJ-45 Compatible, High and Low Temperature, Oil and Gasoline Exposure, Limited Combustible FHC 25/50
7928A - 24 AWG Bonded-Pair solid bare copper conductors, FEP insulation, sunlight, oil and gas resistant FEP jacket. Sequential marking at two foot intervals.
* Utilizes a 4 over 4 contact design (4 LONG and 4 SHORT) that provides increased isolation and spatial dispersion within the plug to minimize crosstalk and accepts .037" - 042" CONDUCTOR OD.
* The conductors are isolated through Plastic Isolation/Insulation Barriers where contact termination is made, thereby improving electrical performance.
* Plug accepts both SOLID or STRANDED conductors
* Made in USA
106-080800-34 Specifications
Performance: Meets or Exceeds ANSI/TIA/EIA 568 - ANSI/TIA 1096-A (Formerly FCC Part 68) - CENELEC EN 50173 -
IEC 60603 - ISO-8877 - ISO/IEC 11801
Contact Material: Phosphor Bronze - .012" thick
Contact Plating: Minimum 50 Micro-Inch Pure Gold - Selective 24 Carat Hard Gold Plate in contact area over 100 Micro-Inch minimum Nickel Plate. Exceeds TIA-1096 specifications (formerly FCC Part 68)
Plug Material: Polycarbonate
Plug Tolerances and Dimensions: Meets TIA-1096 specifications (formerly FCC Part 68)
UL Recognized: UL File #E188111
Flame Autoextinguish: 94-V0
Operating Temperature: -40º C to +85º C
Insertion/Extraction Life: 1000 Minimum Cycles
Contact Resistance: 10 Milli-Ohms maximum
Current/Voltage: 30 VAC/42 VDC at 1.5 Amps
Compliance: RoHS Compliant
106-080800-34 Termination Instructions
Recommended Hand Crimp Tool - 900005 (with factory installed die set 900216)
DO NOT TAKE THIS STEP FOR GRANTED
Cable assemblies built using inadequate or poor quality tools and dies.....worn out tooling.....or mismatched tooling, WILL HAVE A MAJOR IMPACT ON THE PERFORMANCE OF THE CABLE ASSEMBLY.
Boot "Locks" into Plug - 360º Honeycomb Design Provides Bend Radius Strain Relief
Clear Plastic eliminates color "mismatch" between cable and boot.
Accepts up to .265" Jacket OD (6.7mm)
1/2 Inch Diameter - Adhesive-Lined, 3:1, Flexible, Polyolefin
"Lock" Everything in Place
CAVEAT EMPTOR.....Let The Buyer Beware
SUB-STANDARD, NON-COMPLIANT and COUNTERFEIT RJ45's coming in from the Far East
KNOW THE STANDARDS - KNOW THE SPECS - INSIST ON COMPLIANCE - KNOW YOUR SUPPLIERSFor more information, contact
dave@rj45s.com
RJ45s.com
2400 East Main Street
St Charles, IL 60174
phone: 630-659-6337
fax: 888-210-4593
