NOT ALL RJ-45S ARE CREATED EQUAL
FEATURING SENTINEL CONNECTOR SYSTEMS - WHEN SIGNAL INTEGRITY MATTERS
Shipping Over 100,000,000 RJ45 Plugs a Year - MADE in USA
Cage Code 71SB6 DUNS 191497254 P:630-659-6337 dave@rj45s.com
Shipping Over 100,000,000 RJ45 Plugs a Year - MADE in USA
Cage Code 71SB6 DUNS 191497254 P:630-659-6337 dave@rj45s.com
BELDEN® 7988P
Low Skew Category 5e CMP Cables
No Spline - .193" OD
Category 5e, 24 AWG bonded pairs solid bare copper conductors, plenum, FEP Teflon® insulation, skew 9.0ns/100m nominal, rip cord, Flamarrest® jacket.
BELDEN® 7988R
Low Skew Category 5e CMR Cables
No Spline - .204" OD
Category 5e, 24 AWG bonded pairs solid bare copper conductors, non-plenum, polyolefin insulation, skew 9.0ns/100m nominal, rip cord, PVC jacket.
Click Arrow in Box for Drop Down Menu
1-99 - $0.89
100-999 - $0.75
1000 - $0.19
Volume Price - Request Quote
111-08080054L34 Product Features
* Incorporates a PATENTED CONDUCTIVE NEXT Reduction System. In addition to providing PRECISE CONDUCTOR ALIGNMENT, the Composite Carbon/Graphite Fiber Conductor Load Bar GREATLY REDUCES NEXT and RETURN LOSS by ABSORBING REFLECTIONS and CHANNELING IT AWAY FROM THE CONDUCTORS. Using recommended termination procedures and equipment, ANSI/TIA-568.2-D Category 6 performance levels are achievable with good workmanship and certified cables.
* Utilizes a 4 over 4 contact design (4 LONG and 4 SHORT) that provides increased isolation and spatial dispersion within the plug to minimize crosstalk and allow for up to a .042" MAXIMUM CONDUCTOR OD.
* The conductors are isolated by the Conductor Load Bar and through Plastic Isolation/Insulation Barriers where contact termination is made, thereby improving electrical performance.
* Plug accepts both SOLID or STRANDED conductors
* Made in USA
111-08080054L34 Specifications
Performance: Meets or Exceeds ANSI/TIA 568-2.D - ANSI/TIA 1096 (Formerly FCC Part 68) - ANSI/TIA 968-A - CENELEC EN 50173 - IEC 60603 - ISO-8877 - ISO/IEC 11801
Contact Material: Phosphor Bronze - .012" thick
Contact Plating: Minimum 50 Micro-Inch Pure Gold - Selective 24 Carat Hard Gold Plate in contact area over 100 Micro-Inch minimum Nickel Plate. Exceeds TIA-1096 specifications (formerly FCC Part 68)
Plug Material: Polycarbonate
Plug Tolerances and Dimensions: Meets TIA-1096 specifications (formerly FCC Part 68)
UL Recognized: UL File #E188111 - UL 1863 (1000v)
Flame Autoextinguish: 94V-0
Operating Temperature: -40º C to +85º C
Insertion/Extraction Life: 1000 Minimum Cycles
Contact Resistance: 10 Milli-Ohms maximum
Current/Voltage: 30 VAC/57 VDC at 1.5 Amps
Compliance: RoHS Compliant
PoE: Meets requirements of 15W PoE (IEEE 802.3af), 30W PoE+ (IEEE 802.3at), 60W PoE++ (IEEE 802.3bt Type 3) and 100W PoE++ (IEEE 802.3bt Type 4)
COMPLEMENTARY PRODUCTS TO "DO THE JOB RIGHT" |
||
 900005/900216  |
TERMINATION TOOL Professional Grade Controlled Ratchet Style Insures Proper Blade Setting Depth 1,000,000 Cycles Minimum DO NOT TAKE THIS STEP FOR GRANTED Cable assemblies built using inadequate or poor quality tools and dies.....worn out tooling.....or mismatched tooling, WILL HAVE A MAJOR IMPACT ON THE PERFORMANCE OF THE CABLE ASSEMBLY. 111-08080054L34 Termination Instructions |
|
 3M™ EPS-300 |
3M™ HEAT SHRINK TUBING 1/2 Inch Diameter Adhesive-Lined, 3:1, Flexible, Polyolefin "Lock" Everything in Place Sold in 1 1/2 Inch Lengths  |
|
The RJ-45 Is A Highly Engineered Interconnection System
CAVEAT EMPTOR.....Let The Buyer Beware
SUB-STANDARD, NON-COMPLIANT and COUNTERFEIT RJ45's coming in from the Far East
KNOW THE STANDARDS - KNOW THE SPECS - INSIST ON COMPLIANCE - KNOW YOUR SUPPLIERSFor more information, contact
dave@rj45s.com
RJ45s.com
2400 East Main Street
St Charles, IL 60174
phone: 630-659-6337
dave@rj45s.com
RJ45s.com
2400 East Main Street
St Charles, IL 60174
phone: 630-659-6337
