NOT ALL RJ-45S ARE CREATED EQUAL
SENTINEL CONNECTOR SYSTEMS - WHEN SIGNAL INTEGRITY MATTERS
VETERAN OWNED BUSINESS ENTERPRISE - MADE IN USA
1,000,000 Plugs Built Every Day + 20,000 Cable Assemblies
Sentinel 111S080890H34 for Superior Essex Category 5e+ ScTP (F/UTP) Riser Cables
VETERAN OWNED BUSINESS ENTERPRISE (VOBE)
VETERAN OWNED BUSINESS ENTERPRISE (VOBE)
Download Interactive Superior Essex-Sentinel RJ45 Plug Cross Reference .XLS Spreadsheet
Category 5e+ ScTP (F/UTP) Riser Cables
Includes part numbers 5F-220-25 (Blue, Plywood Reel), 5F-220-35 (Gray, Plywood Reel), 5F-220-45 (White, Plywood Reel), 5F-220-55 (Green, Plywood Reel), 5F-220-65 (Yellow, Plywood Reel), 5F-220-95 (Red, Plywood Reel), 5F-220-D5 (Orange, Plywood Reel), 5F-220-E5 (Black, Plywood Reel).
111S08080090H34 Product Features
* Shielded RJ45 plug with integral "C CRIMP" for increased shield effectiveness, added cable stress relief and additional strength. Accepts up to a .310" cable jacket OD
* Incorporates a PATENTED CONDUCTIVE NEXT Reduction System. In addition to providing PRECISE CONDUCTOR ALIGNMENT, the Composite Carbon/Graphite Fiber Conductor Load Bar GREATLY REDUCES NEXT and RETURN LOSS by ABSORBING REFLECTIONS and CHANNELING IT AWAY FROM THE CONDUCTORS. Using recommended termination procedures and equipment, ANSI/TIA/EIA 568 Category 6 performance levels are achievable with good workmanship and certified cables.
* Utilizes a 4 over 4 contact design (4 LONG and 4 SHORT) that provides increased isolation and spatial dispersion within the plug to minimize crosstalk and accepts .044" - 048" CONDUCTOR OD.
* The conductors are isolated by the Conductor Load Bar and through Plastic Isolation/Insulation Barriers where contact termination is made, thereby improving electrical performance.
* Plug accepts both SOLID or STRANDED conductors
* Made in USA
111S08080090H34 Specifications
Performance: Meets or Exceeds ANSI/TIA/EIA 568 - ANSI/TIA 1096-A (Formerly FCC Part 68) - CENELEC EN 50173 -
IEC 60603 - ISO-8877 - ISO/IEC 11801
Contact Material: Phosphor Bronze - .012" thick
Contact Plating: Minimum 50 Micro-Inch Pure Gold - Selective 24 Carat Hard Gold Plate in contact area over 100 Micro-Inch minimum Nickel Plate. Exceeds TIA-1096 specifications (formerly FCC Part 68)
Plug Material: Polycarbonate
Plug Tolerances and Dimensions: Meets TIA-1096 specifications (formerly FCC Part 68)
UL Recognized: UL File #E188111
Flame Autoextinguish: 94-V0
Operating Temperature: -40º C to +85º C
Insertion/Extraction Life: 1000 Minimum Cycles
Contact Resistance: 10 Milli-Ohms maximum
Current/Voltage: 30 VAC/42 VDC at 1.5 Amps
Compliance: RoHS Compliant
111S08080090H34 Termination Instructions
PROPER CABLE PREPARATION INCLUDES COPPER SHIELDING TAPE TO MAINTAIN SHIELD INTEGRITY & PROVIDING A PLACE FOR THE "C CRIMP" SHIELD ON THE CABLE
Recommended Shielding Tape - 3M 1181 - 1/2" Copper Foil with Conductive Adhesive 
Recommended Hand Crimp Tool - 900020 (with factory installed die set) 
DO NOT TAKE THIS STEP FOR GRANTED
Cable assemblies built using inadequate or poor quality tools and dies.....worn out tooling.....or mismatched tooling, WILL HAVE A MAJOR IMPACT ON THE PERFORMANCE OF THE CABLE ASSEMBLY.
Professional Grade - Controlled Ratchet Style Insures Proper Blade Setting Depth - 1,000,000 Cycles MinimumDO NOT TAKE THIS STEP FOR GRANTED
Cable assemblies built using inadequate or poor quality tools and dies.....worn out tooling.....or mismatched tooling, WILL HAVE A MAJOR IMPACT ON THE PERFORMANCE OF THE CABLE ASSEMBLY.
Heat Shrink - 3M™ Heat Shrink Tubing EPS-300
Adhesive-Lined, 3:1, Flexible, Polyolefin
"Lock" Everything in Place
Sold in 3 Inch Lengths
Recommended Snagless Boots for Larger Jacket OD's up to .314" (8mm)
Care must be taken to fully wrap the C CRIMP around the Cable (360º) to insure proper fit.
Five (5) available colors: B0041 (Gray) B0042 (Blue) B0043 (White) B0044 (Yellow) B0051 (Black)
| |
The RJ-45 Is A Highly Engineered Interconnection System
CAVEAT EMPTOR.....Let The Buyer Beware
SUB-STANDARD, NON-COMPLIANT and COUNTERFEIT RJ45's coming in from the Far East
KNOW THE STANDARDS - KNOW THE SPECS - INSIST ON COMPLIANCE - KNOW YOUR SUPPLIERS
For more information, contact
dave@rj45s.com
RJ45s.com
2400 East Main Street
St Charles, IL 60174
phone: 630-659-6337
fax: 888-210-4593
dave@rj45s.com
RJ45s.com
2400 East Main Street
St Charles, IL 60174
phone: 630-659-6337
fax: 888-210-4593
