SENTINEL CONNECTOR SYSTEMS - WHEN SIGNAL INTEGRITY MATTERS
VETERAN OWNED BUSINESS ENTERPRISE - MADE IN USA
1,000,000 Plugs Built Every Day + 20,000 Cable Assemblies
VETERAN OWNED BUSINESS ENTERPRISE (VOBE)
LANmark-2000 Category 6e Riser
Includes part numbers 10167478 (Light Grey Reel), 10167479 (Light Grey Reel in a Box), 10167480 (White Reel), 10167481 (White Reel in a Box), 10170687 (Green Reel), 10170688 (Green Reel in a Box), 10170689 (Orange Reel), 10170690 (Orange Reel in a Box), 10167482 (Yellow Reel), 10167483 (Yellow Reel in a Box), 10167476 (Blue Reel), 10167477 (Blue Reel in a Box), 10170691 (Violet Reel), 10170692 (Violet Reel in a Box), 10170693 (Red Reel), 10170694 (Red Reel in a Box), 10189739 (Black Reel)
* Incorporates a PATENTED CONDUCTIVE NEXT Reduction System. In addition to providing PRECISE CONDUCTOR ALIGNMENT, the Composite Carbon/Graphite Fiber Conductor Load Bar GREATLY REDUCES NEXT and RETURN LOSS by ABSORBING REFLECTIONS and CHANNELING IT AWAY FROM THE CONDUCTORS. Using recommended termination procedures and equipment, ANSI/TIA/EIA 568 Category 6 performance levels are achievable with good workmanship and certified cables.
* Utilizes a 4 over 4 contact design (4 LONG and 4 SHORT) that provides increased isolation and spatial dispersion within the plug to minimize crosstalk and allow for up to a .042" MAXIMUM CONDUCTOR OD.
* The conductors are isolated by the Conductor Load Bar and through Plastic Isolation/Insulation Barriers where contact termination is made, thereby improving electrical performance.
* Plug accepts both SOLID or STRANDED conductors
* Made in USA
111-08080054L34 Specifications
Performance: Meets or Exceeds ANSI/TIA/EIA 568 - ANSI/TIA 1096-A (Formerly FCC Part 68) - CENELEC EN 50173 -
IEC 60603 - ISO-8877 - ISO/IEC 11801
Contact Material: Phosphor Bronze - .012" thick
Contact Plating: Minimum 50 Micro-Inch Pure Gold - Selective 24 Carat Hard Gold Plate in contact area over 100 Micro-Inch minimum Nickel Plate. Exceeds TIA-1096 specifications (formerly FCC Part 68)
Plug Material: Polycarbonate
Plug Tolerances and Dimensions: Meets TIA-1096 specifications (formerly FCC Part 68)
UL Recognized: UL File #E188111
Flame Autoextinguish: 94-V0
Operating Temperature: -40º C to +85º C
Insertion/Extraction Life: 1000 Minimum Cycles
Contact Resistance: 10 Milli-Ohms maximum
Current/Voltage: 30 VAC/42 VDC at 1.5 Amps
Compliance: RoHS Compliant
111-08080054L34 Termination Instructions
DO NOT TAKE THIS STEP FOR GRANTED
Cable assemblies built using inadequate or poor quality tools and dies.....worn out tooling.....or mismatched tooling, WILL HAVE A MAJOR IMPACT ON THE PERFORMANCE OF THE CABLE ASSEMBLY.
Boot "Locks" into Plug - 360º Honeycomb Design Provides Bend Radius Strain Relief
Clear Plastic eliminates color "mismatch" between cable and boot.
Accepts up to .265" Jacket OD (6.7mm)
Heat Shrink - 3M™ Heat Shrink Tubing EPS-300
1/2 Inch Diameter - Adhesive-Lined, 3:1, Flexible, Polyolefin
"Lock" Everything in Place
CAVEAT EMPTOR.....Let The Buyer Beware
SUB-STANDARD, NON-COMPLIANT and COUNTERFEIT RJ45's coming in from the Far East
KNOW THE STANDARDS - KNOW THE SPECS - INSIST ON COMPLIANCE - KNOW YOUR SUPPLIERSdave@rj45s.com
RJ45s.com
2400 East Main Street
St Charles, IL 60174
phone: 630-659-6337
fax: 888-210-4593
