NOT ALL RJ-45S ARE CREATED EQUAL
SENTINEL CONNECTOR SYSTEMS - WHEN SIGNAL INTEGRITY MATTERS
VETERAN OWNED BUSINESS ENTERPRISE - MADE IN USA
1,000,000 Plugs Built Every Day + 20,000 Cable Assemblies
Sentinel 111S08080090H34 for Berk-Tek LANmark™-6
Category 6 FTP Plenum Cables
VETERAN OWNED BUSINESS ENTERPRISE (VOBE)
Category 6 FTP Plenum Cables
VETERAN OWNED BUSINESS ENTERPRISE (VOBE)
LANmark-6 FTP Category 6 Plenum Cables
Includes part numbers 10057903 (Grey), 10063671 (Red), 10081254 (Violet), 10089751(Green), 10095838 (Orange), 10062608 (Yellow),10063672 (Black), 10081255 (White), 10091131 (Blue), 10188366 (Pink).
111S08080090H34 Product Features
* Shielded RJ45 plug with integral "C CRIMP" for increased shield effectiveness, added cable stress relief and additional strength. Accepts up to a .310" cable jacket OD
* Incorporates a PATENTED CONDUCTIVE NEXT Reduction System. In addition to providing PRECISE CONDUCTOR ALIGNMENT, the Composite Carbon/Graphite Fiber Conductor Load Bar GREATLY REDUCES NEXT and RETURN LOSS by ABSORBING REFLECTIONS and CHANNELING IT AWAY FROM THE CONDUCTORS. Using recommended termination procedures and equipment, ANSI/TIA/EIA 568 Category 6 performance levels are achievable with good workmanship and certified cables.
* Utilizes a 4 over 4 contact design (4 LONG and 4 SHORT) that provides increased isolation and spatial dispersion within the plug to minimize crosstalk and accepts .044" - 048" CONDUCTOR OD.
* The conductors are isolated by the Conductor Load Bar and through Plastic Isolation/Insulation Barriers where contact termination is made, thereby improving electrical performance.
* Plug accepts both SOLID or STRANDED conductors
* Made in USA
111S08080090H34 Specifications
Performance: Meets or Exceeds ANSI/TIA/EIA 568 - ANSI/TIA 1096-A (Formerly FCC Part 68) - CENELEC EN 50173 -
IEC 60603 - ISO-8877 - ISO/IEC 11801
Contact Material: Phosphor Bronze - .012" thick
Contact Plating: Minimum 50 Micro-Inch Pure Gold - Selective 24 Carat Hard Gold Plate in contact area over 100 Micro-Inch minimum Nickel Plate. Exceeds TIA-1096 specifications (formerly FCC Part 68)
Plug Material: Polycarbonate
Plug Tolerances and Dimensions: Meets TIA-1096 specifications (formerly FCC Part 68)
UL Recognized: UL File #E188111
Flame Autoextinguish: 94-V0
Operating Temperature: -40º C to +85º C
Insertion/Extraction Life: 1000 Minimum Cycles
Contact Resistance: 10 Milli-Ohms maximum
Current/Voltage: 30 VAC/42 VDC at 1.5 Amps
Compliance: RoHS Compliant
111S08080090H34 Termination Instructions
PROPER
CABLE PREPARATION INCLUDES COPPER SHIELDING TAPE TO MAINTAIN SHIELD
INTEGRITY & PROVIDING A PLACE FOR THE "C CRIMP" SHIELD ON THE CABLE
Recommended Hand Crimp Tool - 900020 (with factory installed die set)
DO NOT TAKE THIS STEP FOR GRANTED
Cable assemblies built using inadequate or poor quality tools and dies.....worn out tooling.....or mismatched tooling, WILL HAVE A MAJOR IMPACT ON THE PERFORMANCE OF THE CABLE ASSEMBLY.
Professional Grade - Controlled Ratchet Style Insures Proper Blade Setting Depth - 1,000,000 Cycles Minimum Recommended Shielding Tape - 3M 1181 - 1/2" Copper Foil with Conductive Adhesive 
Recommended Hand Crimp Tool - 900020 (with factory installed die set)
DO NOT TAKE THIS STEP FOR GRANTED
Cable assemblies built using inadequate or poor quality tools and dies.....worn out tooling.....or mismatched tooling, WILL HAVE A MAJOR IMPACT ON THE PERFORMANCE OF THE CABLE ASSEMBLY.
Heat Shrink - 3M™ Heat Shrink Tubing EPS-300
Adhesive-Lined, 3:1, Flexible, Polyolefin
"Lock" Everything in Place
Sold in 3 Inch Lengths
Recommended Snagless Boots for Larger Jacket OD's up to .314" (8mm) 
Care must be taken to fully wrap the C CRIMP around the Cable (360º) to insure proper fit.
Five (5) available colors
B00041 (Gray) B00042 (Blue) B00043 (White) B00044 (Yellow) B00051 (Black)
Care must be taken to fully wrap the C CRIMP around the Cable (360º) to insure proper fit.
Five (5) available colors
B00041 (Gray) B00042 (Blue) B00043 (White) B00044 (Yellow) B00051 (Black)
| |
The RJ45 Is A Highly Engineered Interconnection System
CAVEAT EMPTOR.....Let The Buyer Beware
SUB-STANDARD, NON-COMPLIANT and COUNTERFEIT RJ45's coming in from the Far East
KNOW THE STANDARDS - KNOW THE SPECS - INSIST ON COMPLIANCE - KNOW YOUR SUPPLIERS
For more information, contact
dave@rj45s.com
RJ45s.com
2400 East Main Street
St Charles, IL 60174
phone: 630-659-6337
fax: 888-210-4593
dave@rj45s.com
RJ45s.com
2400 East Main Street
St Charles, IL 60174
phone: 630-659-6337
fax: 888-210-4593
