SENTINEL CONNECTOR SYSTEMS - WHEN SIGNAL INTEGRITY MATTERS
VETERAN OWNED BUSINESS ENTERPRISE - MADE IN USA
1,000,000 Plugs Built Every Day + 20,000 Cable Assemblies
VETERAN OWNED BUSINESS ENTERPRISE (VOBE)
Download Interactive Belden-Sentinel RJ-45 Plug Cross Reference .XLS Spreadsheet
BELDEN Category 5e DataTuff®
Twisted Pair Cable
Industrial
Ethernet, Harsh Environments, Category 5e, Gigabit Ethernet, 100BaseTX,
100BaseVG ANYLAN, 155ATM, 622ATM, NTSC/PAL Component or Composite
Video, AES/EBU Digital Audio, AES51, RS-422, Noisy Environments, CMX -
Outdoor, EtherNet/IP™
7921A - 24 AWG Bonded-Pairs solid bare copper conductors, polyolefin insulation, overall Beldfoil® (100% coverage) plus tinned copper braid shield (70% coverage), drain wire, industrial grade sunlight- and oil-resistant PVC jacket. Seq. marking at 2 ft. intervals.
* Shielded RJ45 plug with integral "C CRIMP" for increased shield effectiveness, added cable stress relief and additional strength
* Using recommended termination procedures and equipment, meets or exceeds Category 5e ANSI/TIA/EIA 568-C.2 performance levels.
* Utilizes a 4 over 4 contact design (4 LONG and 4 SHORT) that provides increased isolation and spatial dispersion within the plug to minimize crosstalk
* 106S08080058C34 accepts up to .048" CONDUCTOR OD. No Load Bar.
* 111S08080090C34 accepts .044" - .048" CONDUCTOR OD and utilizes Patented Conductive Next Load Bar
* The conductors are isolated by Plastic Isolation/Insulation Barriers where contact termination is made, thereby improving electrical performance.
* Plug accepts both SOLID or STRANDED conductors
* Made in USA
106S08080058C34 Specifications
111S08080090C34 Specifications
Performance: Meets or Exceeds ANSI/TIA/EIA 568 - ANSI/TIA 1096-A (Formerly FCC Part 68) - CENELEC EN 50173 -
IEC 60603 - ISO-8877 - ISO/IEC 11801
Contact Material: Phosphor Bronze - .012" thick
Contact Plating: Minimum 50 Micro-Inch Pure Gold - Selective 24 Carat Hard Gold Plate in contact area over 100 Micro-Inch minimum Nickel Plate. Exceeds TIA-1096 specifications (formerly FCC Part 68)
Plug Material: Polycarbonate
Plug Tolerances and Dimensions: Meets TIA-1096 specifications (formerly FCC Part 68)
UL Recognized: UL File #E188111
Flame Autoextinguish: 94-V0
Operating Temperature: -40º C to +85º C
Insertion/Extraction Life: 1000 Minimum Cycles
Contact Resistance: 10 Milli-Ohms maximum
Current/Voltage: 30 VAC/42 VDC at 1.5 Amps
Compliance: RoHS Compliant
106S08080058C34 Termination Instructions
111SS08080090C34 Termination Instructions
PROPER CABLE PREPARATION INCLUDES COPPER SHIELDING TAPE TO MAINTAIN SHIELD INTEGRITY & PROVIDING A PLACE FOR THE "C CRIMP" SHIELD ON THE CABLE
DO NOT TAKE THIS STEP FOR GRANTED
Cable assemblies built using inadequate or poor quality tools and dies.....worn out tooling.....or mismatched tooling, WILL HAVE A MAJOR IMPACT ON THE PERFORMANCE OF THE CABLE ASSEMBLY.
Heat Shrink - 3M™ Heat Shrink Tubing EPS-300
1/2 Inch Diameter - Adhesive-Lined, 3:1, Flexible, Polyolefin
"Lock" Everything in Place
The RJ-45 Is A Highly Engineered Interconnection System
CAVEAT EMPTOR.....Let The Buyer Beware
SUB-STANDARD, NON-COMPLIANT and COUNTERFEIT RJ45's coming in from the Far East
KNOW THE STANDARDS - KNOW THE SPECS - INSIST ON COMPLIANCE - KNOW YOUR SUPPLIERSdave@rj45s.com
RJ45s.com
2400 East Main Street
St Charles, IL 60174
phone: 630-659-6337
fax: 888-210-4593
