NOT ALL RJ-45S ARE CREATED EQUAL
FEATURING SENTINEL CONNECTOR SYSTEMS - WHEN SIGNAL INTEGRITY MATTERS
          Shipping Over 100,000,000 RJ45 Plugs a Year - MADE in USA
Cage Code 71SB6   DUNS 191497254    P:630-659-6337    dave@rj45s.com


             
111-08080054L34
Category 6 RJ45 Plug With PATENTED Conductive NEXT Reduction System

111-08080054L34

Click in Box for PayPal Drop Down Menu
1-99 - $.89
100-999 - $.75
1000 - $.19

Can't Use PayPal?....email order





111-08080054L34 Product Features

*   Incorporates a PATENTED CONDUCTIVE NEXT Reduction System. In addition to providing PRECISE CONDUCTOR ALIGNMENT, the Composite Carbon/Graphite Fiber Conductor Load Bar GREATLY REDUCES NEXT and RETURN LOSS by ABSORBING REFLECTIONS and CHANNELING IT AWAY FROM THE CONDUCTORS. Using recommended termination procedures and equipment, ANSI/TIA 568.2-D Category 6 performance levels are achievable with good workmanship and certified cables.
*   Utilizes a 4 over 4 contact design (4 LONG and 4 SHORT) that provides increased isolation and spatial dispersion within the plug to minimize crosstalk and allow for up to a .042" MAXIMUM CONDUCTOR OD. 
*   The conductors are isolated by the Conductor Load Bar and through Plastic Isolation/Insulation Barriers where contact termination is made, thereby improving electrical performance.
*   Plug accepts both SOLID or STRANDED conductors
*   Made in USA

111-08080054L34 Specifications 

Performance:    Meets or Exceeds ANSI/TIA 568-2.D - ANSI/TIA 1096 (Formerly FCC Part 68) - ANSI/TIA 968-A - CENELEC EN 50173 - IEC 60603 - ISO-8877 - ISO/IEC 11801 
Contact Material:   Phosphor Bronze - .012" thick
Contact Plating:   Minimum 50 Micro-Inch Pure Gold - Selective 24 Carat Hard Gold Plate in contact area over 100 Micro-Inch minimum Nickel Plate. Exceeds TIA-1096 specifications (formerly FCC Part 68)
Plug Material:   Polycarbonate
Plug Tolerances and Dimensions:   Meets TIA-1096 specifications (formerly FCC Part 68)
UL Recognized:   UL File #E188111 - UL 1863 (1000v)
Flame Autoextinguish:   94V-0
Operating Temperature:   -40º C to +85º C
Insertion/Extraction Life:   1000 Minimum Cycles
Contact Resistance:  10 Milli-Ohms maximum
Current/Voltage:   30 VAC/57 VDC at 1.5 Amps
Compliance:   RoHS Compliant
PoE:   Meets requirements of 15W PoE (IEEE 802.3af), 30W PoE+ (IEEE 802.3at), 60W PoE++ (IEEE 802.3bt Type 3) and 100W PoE++ (IEEE 802.3bt Type 4)



COMPLEMENTARY PRODUCTS TO "DO THE JOB RIGHT" 



900005/900216
TERMINATION TOOL

Professional Grade
Controlled Ratchet Style 
Insures Proper Blade Setting Depth 
1,000,000 Cycles Minimum
 
DO NOT TAKE THIS STEP FOR GRANTED

Cable assemblies built using inadequate or poor quality tools and dies.....worn out tooling.....or mismatched tooling, WILL HAVE A MAJOR IMPACT ON THE PERFORMANCE OF THE CABLE ASSEMBLY.

111-08080054L34 Termination Instructions  


900005/900216


B00046L
SNAGLESS STRAIN RELIEF BOOT OPTIONS

  CLEAR PLASTIC SLIM-LINE SNAGLESS BOOT
            
Boot "Locks" into Plug - 360º Honeycomb Design Provides Bend Radius Strain Relief - Clear Plastic eliminates color "mismatch" between cable and boot.

Accepts up to 6.7MM Jacket OD (.264")




OTHER BOOT OPTIONS - BASED ON JACKET OD's
6.0MM (.240")     6.7.0MM (.264")
B00046L
 
 


3M™ EPS-300
3M™ HEAT SHRINK TUBING 

1/2 Inch Diameter
Adhesive-Lined, 3:1, Flexible, Polyolefin
"Lock" Everything in Place
Sold in 1 1/2" Inch Lengths

 
3M EPS-300 Heat Shrink

The RJ-45 Is A Highly Engineered Interconnection System

CAVEAT EMPTOR.....Let The Buyer Beware

SUB-STANDARD, NON-COMPLIANT and COUNTERFEIT RJ45's coming in from the Far East

KNOW THE STANDARDS - KNOW THE SPECS - INSIST ON COMPLIANCE - KNOW YOUR SUPPLIERS


For more information, contact
dave@rj45s.com

RJ45s.com
2400 East Main Street
St Charles, IL 60174
phone: 630-659-6337
                                                                                                 

Copyright . Lynn, Katie and Scott. All rights reserved.
Website Builder