114S040800C34 Product Features
* Shielded RJ45 plug with integral "C CRIMP" for increased shield effectiveness, added cable stress relief and additional strength
* Using recommended termination procedures and equipment, meets or exceeds Category 5e ANSI/TIA/EIA 568-C.2 performance levels.
* Utilizes Selectively Loaded Contacts in positions 1, 2, 3 and 6 (Ethernet Protocol) and accepts .055" to .060" CONDUCTOR OD.
* The
conductors are isolated by Plastic Isolation/Insulation Barriers where
contact termination is made, thereby improving electrical performance.
* Plug accepts both SOLID or STRANDED conductors
* Made in USA
1114S040800C34 Specifications 
Performance: Meets or Exceeds ANSI/TIA 568-C.2 - ANSI/TIA 1096-B (Formerly FCC Part 68) - CENELEC EN 50173 -
IEC 60603 - ISO-8877 - ISO/IEC 11801
Contact Material: Phosphor Bronze - .012" thick
Contact Plating: Minimum 50
Micro-Inch Pure Gold - Selective 24 Carat Hard Gold Plate in contact
area over 100 Micro-Inch minimum Nickel Plate. Exceeds TIA-1096
specifications (formerly FCC Part 68)
Plug Material: Polycarbonate
Plug Tolerances and Dimensions: Meets TIA-1096 specifications (formerly FCC Part 68)
UL Recognized: UL File #E188111
Flame Autoextinguish: 94-V0
Operating Temperature: -40º C to +85º C
Insertion/Extraction Life: 1000 Minimum Cycles
Contact Resistance: 10 Milli-Ohms maximum
Current/Voltage: 30 VAC/42 VDC at 1.5 Amps
Compliance: RoHS Compliant
COMPLEMENTARY PRODUCTS TO "DO THE JOB RIGHT"
|

900007

Terminates Both
Contacts and "C" Crimp
|
TERMINATION TOOL
Professional Grade
Controlled Ratchet Style
Insures Proper Blade Setting Depth
1,000,000 Cycles Minimum
DO NOT TAKE THIS STEP FOR GRANTED
Cable assemblies built using inadequate or poor quality tools and dies.....worn out tooling.....or mismatched tooling, WILL HAVE A MAJOR IMPACT ON THE PERFORMANCE OF THE CABLE ASSEMBLY.
114S080800C34 Termination Instructions

|
|

3M™ 1181

|
PROPER CABLE PREPARATION INCLUDES COPPER SHIELDING TAPE TO MAINTAIN SHIELD INTEGRITY & PROVIDING A PLACE FOR THE "C CRIMP" SHIELD ON THE CABLE
3M™ 1181
1/2" Copper Foil Shielding Tape
with Conductive Adhesive

Load Bar Shown in Picture
|
|

3M™ EPS-300

|
3M™ HEAT SHRINK TUBING
1/2 Inch Diameter
Adhesive-Lined, 3:1, Flexible, Polyolefin
"Lock" Everything in Place
Sold in 1 1/2 Inch Lengths
|
|
The RJ-45 Is A Highly Engineered Interconnection System
CAVEAT
EMPTOR.....Let The Buyer
Beware
SUB-STANDARD, NON-COMPLIANT and COUNTERFEIT RJ45's coming in from the Far East
KNOW THE STANDARDS - KNOW THE SPECS - INSIST ON COMPLIANCE - KNOW YOUR SUPPLIERS
For more information, contact
dave@rj45s.com
RJ45s.com
2400 East Main Street
St Charles, IL 60174
phone: 630-659-6337